A-1 Voltage Booster – Stinson L-5 Club

Tagged: A-1 Voltage Booster

This topic has 15 replies, 3 voices, and was last updated 3 years, 9 months ago by Matt Anderson.

Viewing 15 reply threads

Author

Posts
- 2022-01-06 at 5:58 pm #4658
  Matt Anderson
  Participant
  I would like to acquire an A-1 Voltage Booster. If one is not currently available, I would like to see if someone can provide dimensions and pics of how one is constructed so that a can reproduce it until an original can be obtained.
  
  Thanks in advance.
  
  Matt
- 2022-01-07 at 6:16 am #4659
  Craig Cantwell
  Participant
  Matt: Is that the booster box for the cockpit light? Hangs just about the left ear on the back cockpit side frame? If so, there are two versions of it. I’ve got one sitting on my table ready to have drawings done. I can also do a schematic if you want it to be operable.
  
  Craig
- 2022-01-07 at 3:49 pm #4660
  Matt Anderson
  Participant
  Yes that is correct. Did not know there were two versions. That would be great if you can also provide the schematic.
  
  Thanks
  
  Matt
- 2022-01-08 at 6:29 am #4661
  Craig Cantwell
  Participant
  Will start working on the drawings this week Matt. The only difference between the two boxes, is one a single output and the other is a dual output.
  
  Craig
- 2022-02-03 at 2:48 pm #5037
  Bill Gorin
  Participant
  Count me in too
  
  Bill
- 2022-07-09 at 3:14 pm #5644
  Matt Anderson
  Participant
  I now have a box of the correct size but I am still needing to see how the cannon plugs are arranged on the side and schematic for internals. Photos would be great also.
  
  Thanks
  
  Matt
- 2022-07-10 at 10:07 am #5645
  Craig Cantwell
  Participant
  Matt: Here are photos of mine. You will have to mount the connectors a little different, as the original has an “L” shaped cover. The connectors are mounted on the side leg of the “L”. The AN3106-12S-3S plugs and mating sockets are available from Mouser, et al., but going to be very hard to find in the silver color. The AN3054-3 and -4 nuts for the single wire terminal and the 3106 backshell are also out there, but hard to find.
  
  Shoot me a direct email and I’ll send you the photos. I can’t seem to make them attach here.
  
  Craig.
  - This reply was modified 3 years, 9 months ago by Craig Cantwell.
- 2022-07-12 at 2:16 pm #5647
  Matt Anderson
  Participant
  Photos provide by Craig Cantwell
- 2022-07-12 at 2:17 pm #5648
  Matt Anderson
  Participant
  Photos provide by Craig Cantwell
- 2022-07-12 at 2:17 pm #5649
  Matt Anderson
  Participant
  Photos provide by Craig Cantwell
- 2022-07-12 at 2:18 pm #5650
  Matt Anderson
  Participant
  Photos provide by Craig Cantwell
- 2022-07-12 at 2:19 pm #5651
  Matt Anderson
  Participant
  Photos provide by Craig Cantwell
- 2022-07-12 at 2:20 pm #5652
  Matt Anderson
  Participant
  Photos provide by Craig Cantwell
- 2022-07-12 at 2:20 pm #5653
  Matt Anderson
  Participant
  Photos provide by Craig Cantwell
  - This reply was modified 3 years, 9 months ago by Matt Anderson.
- 2022-07-12 at 2:21 pm #5655
  Matt Anderson
  Participant
  Photos provide by Craig Cantwell
- 2022-07-12 at 2:41 pm #5656
  Matt Anderson
  Participant
  Photo provided by another forum member
Author

Posts