Tee Nuts

Main Page › Forums › L-5 Restoration Forum › Tee Nuts

Tagged: 

Viewing 3 reply threads
  • Author
    Posts
    • 2021-12-15 at 2:12 pm #4573
      Geoff Hill
      Participant

        G’day Team, I recently saw a discussion regarding Tee Nuts  but cannot find it again. I will be posting the same request on the old IO forum.
        I am looking for a supply of the Tee Nuts IPC part number 58036 (United-Carr) or equivallant. Is anyone able to point me in the right direction please?
        Hilly

      • 2021-12-15 at 4:57 pm #4575
        Matt Anderson
        Participant

          Here is what I used for Tee nuts on the doors 8-32 thread. They are now referred to as Weld nuts, the only difference being that they are missing the dimples. Sam Taber recommended in another thread in the restoration forum that he used a punch and a dimpled backing plate to punch the dimples on either tab.

          McMaster Carr part number 90594a111

          • This reply was modified 4 years, 4 months ago by Matt Anderson.
        • 2021-12-15 at 5:35 pm #4577
          admin
          Keymaster

            This is what Don Ayers found. They need the dimples added manually if you want to go that far into detail.sri-supplies.com/slab-base-weld-nut-832-x-14-38127000

            • This reply was modified 4 years, 4 months ago by admin.
          • 2021-12-16 at 1:32 am #4579
            Geoff Hill
            Participant

              Many thanks to both Matt and Jim (for Don) for such a quick response. I also had emails from Sam Taber as well, thanks Sam!!

              Messages passed to the maintenance team to order the parts. Hopefully they will be onsite when I return to Wangaratta to put VH-BFR back together again.

              Hilly

          • Author
            Posts
          Viewing 3 reply threads
          • You must be logged in to reply to this topic.
          error: Content is protected !!